» Cisco » Examen Cisco CCNA V3.1 » Module 2 » Chapitre 11 » Question 6/19

---

6.**732.jpg**
Select the commands that will apply the ACL in the diagram to filter traffic going to the 192.168.2.0 network.


Router1# configure terminal Router1(config)# access-list 10 in E0


Router1(config)# interface ethernet 0
Router1(config-if)# access-list 10 in


Router2(config)# interface s1
Router2(config-if)# ip access-group 10 out


Router2(config)# interface ethernet 0
Router2(config-if)# ip access-group 10 out


Router1(config)# interface ethernet 0
Router1(config-if)# ip access-group 10 out


Router2# configure terminal
Router2(config)# access-group 10 out

---

« Question 5

Question 7 »